Wagon lighting 150 N digitally assembled board SMD strips cold white
Wagon lighting 4.0
Complete set for 5 N gauge wagons in digital operation.
Lighting color is cold white, special for Epoch IV -
The only thing you need to get according to your wagons is some wire and glue.
Everything else is included in the set.
The facts:
- Color cold white
- Length 150mm
- easy to assemble
- Can also be done with intermediate soldering skills
- Brightness adjustment
- Protection of the control panel against assumed short circuits
- Long service life of the electrolytic capacitor, no more flickering
- Complete delivery from a single source
- cheap price
- Service in case of problems
- The board measures 14 x 7 mm.
Waggon lighting DIGITAL-4.0 in the colors warm white and white.
The circuit board is already populated with the components.
The light strips can be shortened every 25 mm for area N
Supplied in lengths 150mm, 100mm and 75mm.
The sets are each designed for 5 wagons and include:
Circuit boards fully assembled
All components for the board
Elkos 220uF, 6.5mm diameter
Light strips
Wheel grinder track N
This is the set for N and TT digital gauges:
By blackening (EDDING) individual SMDs, the brightness in the entire wagon can be controlled
the light and dark in individual areas. The distance between the separations is 25 mm.
Each set consists of:
5 x circuit boards for digitally pre-assembled
5 x Elko 220 uF
10 x wheel grinders N/TT
5 x light strip SMD 150 mm
I only recommend this set for digital operation, as it varies with an analogue system
Tensions arise during driving. This results in different brightness.
If you have an analog system, my sets are better suited for this type of system because they...
Keep the brightness of the lighting constant when driving slowly.
The functions:
Bridge rectifier
They ensure that no matter how the wagon is positioned on the rail, we always have clear +poles and –poles.
Support capacitor
It prevents the SMD from flickering when crossing a switch.
Resistances
Adjusts the voltage to the SMD.
Potentiometers
This is used to adjust the brightness of the SMD.
Complete set for 5 N gauge wagons in digital operation.
Lighting color is cold white, special for Epoch IV -
The only thing you need to get according to your wagons is some wire and glue.
Everything else is included in the set.
The facts:
- Color cold white
- Length 150mm
- easy to assemble
- Can also be done with intermediate soldering skills
- Brightness adjustment
- Protection of the control panel against assumed short circuits
- Long service life of the electrolytic capacitor, no more flickering
- Complete delivery from a single source
- cheap price
- Service in case of problems
- The board measures 14 x 7 mm.
Waggon lighting DIGITAL-4.0 in the colors warm white and white.
The circuit board is already populated with the components.
The light strips can be shortened every 25 mm for area N
Supplied in lengths 150mm, 100mm and 75mm.
The sets are each designed for 5 wagons and include:
Circuit boards fully assembled
All components for the board
Elkos 220uF, 6.5mm diameter
Light strips
Wheel grinder track N
This is the set for N and TT digital gauges:
By blackening (EDDING) individual SMDs, the brightness in the entire wagon can be controlled
the light and dark in individual areas. The distance between the separations is 25 mm.
Each set consists of:
5 x circuit boards for digitally pre-assembled
5 x Elko 220 uF
10 x wheel grinders N/TT
5 x light strip SMD 150 mm
I only recommend this set for digital operation, as it varies with an analogue system
Tensions arise during driving. This results in different brightness.
If you have an analog system, my sets are better suited for this type of system because they...
Keep the brightness of the lighting constant when driving slowly.
The functions:
Bridge rectifier
They ensure that no matter how the wagon is positioned on the rail, we always have clear +poles and –poles.
Support capacitor
It prevents the SMD from flickering when crossing a switch.
Resistances
Adjusts the voltage to the SMD.
Potentiometers
This is used to adjust the brightness of the SMD.